Баллоны Luxfer, паспорт и расшифровки надписей на горловине.
25E = Thread Specification - Important to ensure the correct valve is used with your cylinder.
GB = Country of Manufacture
LUXFER = Cylinder Manufacturer
L2816Z ....= Cylinder Type Number and Serial Number - This number is recorded by Luxfer which means, if ever necessary, the entire manufacturing history of your cylinder can be traced.
AA6061 T6 = Alloy of Construction
11,5MM = Design Minimum Wall Thickness.
14,8KG = Empty Weight of Cylinder Only (kg)
13,4L = Minimum Water Capacity (litres)
PH 250 BAR = (Test Pressure) - Shows the pressure that the cylinder should be tested to - this must not be exceeded.
TARE 16,1 KG = Weight of cylinder plus valve plus any accessories fitted at time of filling such as collar and cage.
10 KG CO2 = Charge Weight.
p 0038 = The mark of Conformity and Notified Body reference number to the Transportable Pressure Equipment Directive 1999/36/EC.
e2UK902 GB = Pattern Approval number according to Directive 84/526. Replaced by EN1975 when this specification is design basis.
